Bering Classic 11940-409 Men's Watch Black • Sapphire Crystal • Slim Quartz Movement

The Bering Classic 11940-409 is an elegant men's wristwatch in Bering's characteristically understated design. The 40 mm matte silver stainless steel case impresses with its slim profile, lending the watch a timeless, pared-back look that suits both formal and casual occasions. The hardened sapphire crystal protects the deep black dial from scratches while ensuring excellent legibility.

A precise quartz movement reliably drives the analogue display with hour, minute and seconds hands. The black calfskin leather strap, 22 mm wide, sits comfortably on the wrist and complements the dark dial beautifully. A water resistance of 3 bar provides reliable protection against splashes in everyday use. The Bering Classic collection stands for minimalist Scandinavian design that dispenses with unnecessary elements and puts quality first.

Key Features of the Bering 11940-409 Watch

• Hardened sapphire crystal for maximum scratch resistance and a clear view of the black dial
• Slim stainless steel case with a 40 mm diameter in minimalist Scandinavian design
• Black calfskin leather strap with analogue quartz movement and 3 bar water resistance for everyday wear

Care Instructions for Wristwatches

Care & Cleaning

• Daily: Wipe case and bracelet with a soft, dry cloth to remove dirt and perspiration.
• Water-resistant watches: Clean with mild soapy water and a soft brush, rinse, dry thoroughly.
  Important: Screw the crown down firmly beforehand!!!
• Non water-resistant: Clean only dry or slightly damp, do not use water or cleaning agents.
• Avoid: Aggressive agents, perfume, cosmetics and heat.
• Leather straps: Do not soak, clean only slightly damp and allow to dry away from heat.
• Water resistance: Do not wear in the shower or bath, have it tested annually.
• Battery (quartz): Have a depleted battery replaced immediately.
• Mechanical watches: Service by a master watchmaker every 5 years.

Storage & Handling

• Store the watch separately, not in direct contact with other jewellery (risk of scratching).
• When winding mechanical watches, remove them from the wrist; do not leave the crown pulled out.