Seiko Shelby II QXA823K Wall Clock Anthracite • Thermometer & Hygrometer • Sweep Quartz Movement

The Seiko Shelby II QXA823K is a sporty yet elegant wall clock inspired by motorsport. Its round case in brushed aluminium in anthracite with striking red accents gives it the characteristic look of a chronograph dial. With a diameter of 33 cm and a depth of 4.9 cm, the clock fits harmoniously into living rooms, offices and hobby spaces alike.

The analogue quartz movement with a silent sweep second hand ensures near-silent operation, making it ideal for bedrooms and workspaces. In addition, the Seiko Shelby II QXA823K offers practical comfort features: an integrated thermometer displays the room temperature, while a built-in hygrometer provides the current humidity level. The clock is powered by two AA batteries. The black dial with high-contrast indices and a sub-dial for the 60-second display underlines the sporty character of this timepiece.

Key Features of the Seiko QXA823K Clock

• Aluminium case in anthracite with motorsport-inspired design and red accents, Ø 33 cm
• Integrated thermometer and hygrometer for temperature and humidity readings directly on the dial
• Silent sweep second hand with analogue quartz movement for near-silent operation

Care Instructions for Wristwatches

Care & Cleaning

• Daily: Wipe case and bracelet with a soft, dry cloth to remove dirt and perspiration.
• Water-resistant watches: Clean with mild soapy water and a soft brush, rinse, dry thoroughly.
  Important: Screw down the crown firmly beforehand!!!
• Not water-resistant: Clean only dry or slightly damp, do not use water or cleaning agents.
• Avoid: Aggressive agents, perfume, cosmetics and heat.
• Leather straps: Do not soak, clean only slightly damp and allow to dry away from heat.
• Water resistance: Do not wear in the shower or bath, have checked annually.
• Battery (quartz): Have a depleted battery replaced immediately.
• Mechanical watches: Service by a master watchmaker every 5 years.

Storage & Handling

• Store watch separately, not in direct contact with other jewellery (risk of scratching).
• Place mechanical watches flat when winding, do not leave the crown pulled out.